Buy From LED Light Expert
 Wall Bracket for Slip Fit Lights (Wall Bracket to Slip Fit Mount (2 3/8inch) – 90 Degree Angle)

Wall Bracket for Slip Fit Lights (Wall Bracket to Slip Fit Mount (2 3/8inch) – 90 Degree Angle)

review
5
0
5
On sale: $54.99
Retail Price:$72.99
You Save:$18.00(25%)
In Stock.
Part Number:78-101

 Wall Bracket for Slip Fit Lights (Wall Bracket to Slip Fit Mount (2 3/8inch) – 90 Degree Angle) –Tenon Adapter- Parking Lot Light Wall Bracket – Flood Light Wall Bracket


  • HEAVY DUTY – Heavy duty aluminum design with double strength welds ensure the bracket lasts the test of time. Protective paint ensures finish. Does not include hardware. Please ensure you are purchasing bolts strong enough to secure a heavy bracket and heavy light.
  • LARGE INDUSTRIAL SIZE – Bracket protrudes 9.8 inches(251mm) from the wall. The arm sticks up 8 inches(204mm)(from center of arm). Tube is 2 inches wide.
  • FLEXIBLE USES - Designed to allow any of our slip fit parking lot lights, Street lights or solar street lights to be mounted to a wall. With a 9.8 inch extension from the wall, tou can now angle a light exactly where you need it. Even if the light needs to be sideways from the wall! Minimalist design allows for use anywhere.
  • EASY INSTALL & INSTRUCTIONS – Bracket is easy to install. Run the wiring through and secure to wall with 4 bolts.(hardware not included). Wire the light and then slide the light over the arm. Rotate the light where you need it and secure the slip fit do the bracket. Adjust the light both up and down and then tighten down. Double check all bolts and perform a safety check.
  • QUALITY AND WARRANTY –High quality design is backed by our 5 Year Warranty.


Heavy Duty Light Bracket Series – Wall and Post light adapters 

Our adapter series allows you to complete your lighting project with ease! Whether you are needing different adapters for your light pole, or wanting to mount a slip fit light to a wall, we have what you need. 

This right angle wall mount bracket is 9.8" long from wall and 8" up. It is rated to hold lights up 50lbs(our biggest 480 watt lights are under 25lbs). It is made of thick steel with double-reinforced weld joints. It is a single tenon configuration for slip-fitting units. This wall mount bracket is suitable as part of a commercial or industrial lighting solution. RAB MAB RAB MCB Styled fixture. Rated for indoor or outdoor use. 

  • Heavy Duty Steel Construction

  • Large Size

  • Extra Strength Welds

  • Minimalist Design works in any area

  • 2 inch tube allows for slip fits to slide over

  • Please note that NO hardware is included

  • Warranty 5 Years



Rugged Grade LED products. Industrial Grade solutions 

Designed in the USA. Copyright 2014-2017
5 Stars
Super Strength Mount
Super strength. Just need to find bolts that are as strong as it.
Did you find this helpful? 
Reviewed by:  from Baton Rouge, LA. on 5/9/2017
5

Related Items

Recently Viewed Items