50 Foot Light Pole - Sports Light Pole or High Mast Pole - Soccer or Football Field Ready - Cross beams for up to 10 Stadium lights included
These poles have a minimum of 24 pieces for free shipping, please call for shipping information if purchasing less than 24 in poles.
Here is a
Sample Sports Light Design Document. (Yours will be different, they are done unique for each project based on location, wind rating, mount type, number of lights and more.)
Baseball, Softball Field Ready
6 of these Poles, plus 36 of our 500 watt Stadium lights to build an amazing stadium light setup on a 250ft field
(This varries as fields can be from 150ft down the line to 300ft, so call for details.
Built to order, so can be customized.
TOWER DESIGN NOTES
1. Tower designed for Exposure C to the TIA-222-G Standard.
2. Tower designed for a 90 mph basic wind in accordance with the TIA-222-G Standard.
3. Tower is also designed for a 40 mph basic wind with 0.25 in ice. Ice is considered to
increase in thickness with height.
4. Deflections are based upon a 60 mph wind.
5. Tower Structure Class II.
6. Topographic Category 1 with Crest Height of 0.000 ft
7. Connections use galvanized A325 bolts, nuts and locking devices. Installation per
TIA/EIA-222 and AISC Specifications.
8. Tower members are "hot dipped" galvanized in accordance with ASTM A123 and ASTM
A153 Standards.
9. TOWER RATING: 88.6%
The tower is a monopole.
This tower is designed using the TIA-222-G standard.
The following design criteria apply:
Basic wind speed of 90 mph.
Structure Class II.
Exposure Category C.
Topographic Category 1.
Crest Height 0.000 ft.
Nominal ice thickness of 0.250 in.
Ice thickness is considered to increase with height.
Ice density of 56 pcf.
A wind speed of 40 mph is used in combination with ice.
Temperature drop of 50 F.
Deflections calculated using a wind speed of 60 mph.
Connections use galvanized A325 bolts, nuts and locking devices. Installation per TIA/EIA-222 and AISC
Specifications..
Tower members are ''hot dipped'' galvanized in accordance with ASTM A123 and ASTM Aandards..
A non-linear (P-delta) analysis was used.
Pressures are calculated at each section.
Stress ratio used in pole design is 1.
Local bending stresses due to climbing loads, feed line supports, and appurtenance mounts are not considered
Heavy Duty Light Bracket Series Wall and Post light adapters
Our adapter series allows you to complete your lighting project with ease! Whether you are needing different adapters for your light pole, or wanting to mount a slip fit light to a wall, we have what you need.
. It is made of thick steel with double-reinforced weld joints. It is a single tenon configuration for slip-fitting units. This wall mount bracket is suitable as part of a commercial or industrial lighting solution. RAB MAB RAB MCB Styled fixture. Rated for indoor or outdoor use.
Heavy Duty Steel Construction
Large size walls for strong wind resistance and 300lb Light loads.
Extra Strength Welds
Minimalist Design works in any area
2 inch tube adapter at the top allows for slip fits to slide over
Please note that NO hardware is included
Warranty 5 Years
Rugged Grade LED products. Industrial Grade solutions
Designed in the USA. Copyright 2013-2024
![[history_item_name]](/cdn-cgi/image/format=auto/assets/templates/common-core/images/spacer.gif)
