LED Remote Control Lights

USA Based Experts in less than 60 seconds Call Now: 800-674-9420
On orders over $49.00
Up to 7 Years Free Warranty On LED Lights

Remote control LED lights eliminate the need for ladders, lifts, or scaffolding to adjust your lighting settings after installation. Using a handheld wireless remote operating on 5.8GHz frequency, you can program motion sensor sensitivity, timeout duration, daylight harvesting thresholds, and dim levels — all from ground level. This is especially valuable for commercial fixtures mounted at heights of 15–40+ feet where physical access to DIP switches or onboard controls would require expensive equipment and downtime. Our remote-compatible LED fixtures span parking lot lights, wall packs, high bay lights, and corn bulbs, giving you full control over your lighting system without disrupting operations.
Our remote control system uses a 5.8GHz wireless signal to communicate with the microwave motion sensor built into (or added to) compatible LED fixtures. Point the remote at the fixture from ground level and adjust settings in real time: motion sensitivity (to avoid false triggers from HVAC or wildlife), hold time (how long the light stays on after movement stops), standby dim level (the low-light output when no motion is detected), and daylight threshold (the ambient light level at which the fixture turns off during daytime). Changes take effect immediately, and settings are stored in the sensor's memory — no reprogramming needed after power cycles.
The 5.8GHz remote control system works with several of our most popular commercial LED product lines: NextGen IV parking lot lights (built-in sensor), Durado III wall packs, Titan 5 UFO high bay lights, Aries III corn bulbs (add-on sensor), Pegasus II high bay bulbs (add-on sensor), and Norani Series wall lights (add-on sensor). Each fixture uses the same universal remote, so one controller manages your entire facility regardless of fixture type. Browse our full range of LED high bay lights and LED parking lot lights for more remote-compatible options.
Adding remote control capability to your commercial LED fixtures delivers practical advantages that save time, money, and improve safety:
Remote control lighting is most valuable when fixtures are mounted high, spread across a large site, or paired with motion sensors that need field adjustment after installation. Warehouses, gyms, parking areas, wall packs, and retail back-of-house spaces can all benefit because teams can change settings without opening fixtures or renting lift equipment.
Remote-controlled LED lights combine programmable settings, efficient LED performance, and practical control access for a variety of applications. Their long service life is supported by modern programming features, helping your investment lasts for years while maintaining strong performance. Fixtures such as the Durado IV LED Wall Lights are suitable for creating a secure and well-lit environment, automatically adjusting to movement while ensuring consistent brightness for entryways and pathways.
Models like the NextGen IV are excellent examples, offering durable performance and customizable programming to adapt to the unique demands of large outdoor spaces.
Whether adjusting brightness for specific tasks or enhancing energy efficiency, these lights deliver practicality and performance. Remote-controlled LED lights offer functionality, efficiency, and convenience for both residential and commercial applications.
Remote-controlled LED fixtures simplify managing commercial lighting systems. Here are answers to the most common questions:
The 5.8GHz wireless remote lets you adjust four key settings on compatible fixtures: motion sensor sensitivity (how much movement triggers full brightness), hold time (how long the light stays at full output after the last detected motion, typically 10 seconds to 30 minutes), standby dim level (the reduced output when no motion is detected, from 10% to off), and daylight harvesting threshold (the ambient light level at which the fixture shuts off to avoid running during daylight hours).
The 5.8GHz remote control has an effective range of up to 50 feet with direct line of sight to the fixture's sensor. For fixtures mounted at standard commercial heights (15–40 feet), this means you can program them while standing directly below on the ground. Point the remote at the sensor window on the fixture and press the programming buttons — the fixture will flash to confirm each setting change.
No. One universal remote works with all compatible fixture families in our lineup — NextGen IV parking lot lights, Durado III wall packs, Titan 5 high bays, Aries III corn bulbs, Pegasus II high bay bulbs, and Norani wall lights. You program each fixture individually by pointing the remote at it, so one remote can manage an entire facility regardless of how many fixtures or fixture types are installed.
No. All settings programmed via the remote are stored in the motion sensor's non-volatile memory. When power is restored after an outage, the fixture returns to its previously programmed settings automatically. You do not need to reprogram the remote or re-enter settings after power cycles, making the system completely lower-maintenance once configured.
Remote controlled lights use wireless communication — typically RF (radio frequency) or Bluetooth — between a handheld remote and a receiver built into the fixture or driver. The remote sends signals to adjust brightness, color temperature, or power state. RF remotes offer longer range (up to 100+ feet) and work through walls, while Bluetooth is best for single-room applications.
Yes. Most remote controlled lights systems support grouping, allowing one remote to control multiple fixtures simultaneously. You can create zones — for example, controlling all aisle lights together while keeping perimeter lights on a separate group. This simplifies operation in large commercial spaces.
Many remote controlled lights are compatible with smart home platforms including Alexa, Google Home, and Apple HomeKit when paired with a compatible hub or WiFi bridge. This enables voice control, automated scheduling, and integration with other smart devices for a fully connected lighting system.
Reduce lift trips to adjust your light settings. Remote control LED lights from LED Light Expert put full programming power in your hand — adjust motion sensitivity, hold time, dim levels, and daylight thresholds from the ground in seconds. With one universal remote that works across parking lot lights, wall packs, high bays, and corn bulbs, managing your entire facility's lighting has never been easier. Browse our remote-compatible fixtures and contact us for help selecting the right solution for your space.
Contact LED Light ExpertCall Now: (800) 674-9420
Dara Greaney is the CEO and President of LEDLightExpert.com, a leading company in commercial lighting solutions. Since 2015, he has led the company to achieve remarkable growth and recognition, including being an Inc5000 winner three times: No. 3783 in 2022, No. 2428 in 2021, and No. 531 in 2020.
Editing by David Peguero.
On orders over $49.00
Up to 7 Years Free Warranty On LED Lights