LED Parking Lot Light Kits

Why Complete Packages Deliver Better Results

Uniform illumination across a parking lot requires matched fixtures — identical wattage, optics, color temperature, and mounting height at every pole position. When fixtures are purchased individually over time or sourced from different suppliers, variations in output, beam distribution, and color can create uneven lighting zones. Those mismatches can look unprofessional and may miss IES recommended foot-candle levels in some areas. Complete packages reduce this risk by keeping fixtures, mounts, and controls consistent across the lot.

Package purchasing can also make budgeting cleaner. Quantity pricing may reduce hardware costs, bundled freight can reduce coordination compared with scattered one-off orders, and one planned installation schedule is easier to manage than phased work across multiple visits. Exact freight and labor costs vary by package, destination, pole length, lift access, and installer, so treat the package as a coordination advantage as well as a price comparison.

What's Included in a Parking Lot Light Kit

Standard LED parking lot light kits include the LED area light fixture, slip-fit or arm-mount bracket, dusk-to-dawn photocell sensor, and all mounting hardware. Fixture-only kits are designed for retrofit projects where existing poles are structurally sound and only the lighting heads need upgrading — a common scenario for lots converting from HID to LED. Complete pole-and-fixture packages add the light pole (steel or aluminum, in standard heights from 15 to 30 feet), anchor bolt set, base cover, and hand hole for wire access. Some packages also include conduit fittings and junction box components for a true turnkey installation.

Customizing Your Parking Lot Light Package

Pole height is the primary variable in parking lot lighting design. Small retail and restaurant lots typically use 15 to 20 foot poles with 100 to 150 watt LED fixtures. Medium commercial lots — grocery stores, office parks, and strip malls — use 20 to 25 foot poles with 150 to 300 watt fixtures. Large industrial and big-box retail lots use 25 to 30+ foot poles with 300 to 500 watt fixtures. Taller poles extend the coverage radius per fixture, reducing the total number of poles required but demanding higher-wattage fixtures to maintain adequate foot-candle levels at ground level.

Fixture selection within a package can include different wattage configurations for different zones of the same lot. Entry and exit points may use higher-output fixtures for enhanced visibility at vehicle and pedestrian conflict points, while interior rows use standard wattage for general illumination. Some projects specify dual-arm or triple-arm brackets to mount multiple fixtures per pole, increasing coverage density in high-traffic areas without adding pole locations. A photometric study — which LED Light Expert provides free for qualifying projects — determines the optimal fixture count, pole placement, and wattage configuration for any specific lot geometry.

LED Technology Advantages for Parking Lots

LED parking lot fixtures consume 50 to 70 percent less energy than the metal halide and high-pressure sodium fixtures they replace. That creates immediate and ongoing utility savings that can accelerate payback on the lighting upgrade. LED fixtures rated at 50,000 to 100,000 hours avoid the frequent lamp replacements HID systems require every 15,000 to 20,000 hours. That matters for pole-mounted fixtures that require bucket trucks for service access. Directional LED optics (Type III, IV, and V distributions) focus light onto the parking surface rather than scattering it above and to the sides, improving usable illumination while reducing light pollution and wasted energy.